Step By Step Guideline of How to Install Satellite Radio Antenna in Your Car is reader-supported. When you buy via links on our site, we may earn an affiliate commission at no extra cost to you. Learn more.

Satellite radios do a lot better than just conventional AM/FM tuners.

If you want seamless connection, want a wide range of programs, that too, in a long, boring trip, then satellite radios are the best bet.

Let’s look at some facts to make you more engaged and interested!

The information is sent by orbiting satellites via clear, static-free digital signals.

You may listen to the same radio material practically anywhere in the United States and Canada without ever losing a station due to being out of range.

Satellite companies feature a large selection of channels for a wide range of preferences, and you’re more likely to find music that isn’t mainstream.

There is also sports, news, traffic, weather, and humor programming.

And a lot more…

New to know about satellite radios? Here are some basics.

What is Satellite Radio?

According to ITU, it is a broadcasting satellite service, programmed for mainly motor vehicles.

The main feature that makes any satellite radio stand out among all the terrestrial, same, old radios is that they can almost be broadcasted nationwide.

This means they cover a huge geographical area (including abandoned savoy!) rather than just a limited locality. Which is great, we must say.

Not only that, the static-free, continuous signal transmission will prevent your radio from producing distortion or suddenly coming to a stop when you’re listening to your favorite jam.

How Does a Satellite Radio Antenna Work?

When you’re dealing with satellite radios, certainly you will need an antenna that will transmit or retransmit the signals from satellite and then off to your car.

Which eventually makes the antenna the main entity.

But how do they work their magic? Well, it’s pretty simple.

First off, two different types of antennas: High Efficiency (HEF) and. Beam Waveguide (BWG).

Both antennas receive and transmit information to and from the satellites in space but what makes them different is how well they execute.

Satellites consist of a control module and receiving and sending antennas.

The satellite’s “wings” are solar panels that convert sunlight into fuel.

Satellites VHF transmissions can traverse clouds and the atmosphere into space.

The distance is 36 thousand kilometers, but they go at the speed of light, 300,000 kilometers per second.

Up-link antennas send signals to satellites while parabolic receivers receive them.

This antenna’s signal is sent to a decoder to get the radio program.

Satellites make it simple to create national or multinational circuits. A parent distributes the message to all subsidiaries.

How to install a satellite radio antenna?

Before we get there, there are a few things you should be aware of as you go through the installation procedure.

So, first, we’ll go through the necessary tools, then the monetary needs, the time you’ll need, and last, the step-by-step guidance.

Tools required

You are always free to go seek professional help, but doing it by hand will not only save a few bucks but will also give you a better understanding of your car.

You just got lucky here because you can install the satellite radios with two different options!

One, you can just throw away that old store radio; and two, you can add the sat-radio with your existing one for much more fun.

Don’t worry, the tools are easy to obtain as it was when you bought your radio.

Starting with the tools for not throwing the excess and installing the new.

  • Add-on tuner with a kit
  • Double-sided adhesive
  • Air conditioning ventilation mount’
  • Auxiliary cord
  • Cigarette Adapters

Anyways, there is more good news, you can install it without even using the AUX-cord. Then you’ll need,

  • Factory adapters
  • Aftermarket antenna adapters (reverse)
  • Extra wires

The materials used previously for the one with AUX-cord might also come in handy.

Now, what do you need when you don’t want to keep the old one?

Answer: have all the tools mentioned previously!

Cost of aftermarket antenna and DIY antenna

The cost of an antenna depends on the purpose and how many signals they expose. Satellite radio antennas fall in a premium range.

They require a dashboard dock; also, they are almost unnoticeable to give your car a less clumsy look.

They are also called the ultimate antennas because not only do they introduce you to seamless connections, but also a decent number of new connections.

Usually, aftermarket radio antennas have a price range from $40-$70. The price might also fluctuate depending on the bonus elements, like a higher-end configuration or anti-theft construction.

Aftermarket satellite radios are offered by only a few manufacturers, one of them is SiriusXM, the price range falls somewhere between $45-$60.

Taking that into consideration, the kit may cost $20. Furthermore, if you seek professional assistance, the costs will continue to mount. (Up to a hundred dollars or so)

A DIY satellite radio antenna installation, however, will save you some money. You may need some elements you can find at your home like PVC booms or aluminum-copper wires or so.

For that type of installment, you will only need to pay the price for the antenna, plus maybe $10 more for luck!

The kits with everything in it will cost $250-$300.

Time required for installation

With professional help, installing will be only a matter of few minutes, (provided that the labor will not help you with the cleaning!). So, that might take up to 45 minutes or more.

But if you like to DIY, you’ll need more than that, because just as well to do the cleaning, you’ll also need to get everything prepared, get yourself in sweatpants, and then do the work.

Hence, the procedure might take a bit more than an hour. That too, if you don’t know how to do the job.

Otherwise, you won’t need more than thirty minutes.

A Step By Step Guide on How to Install Satellite Radio Antenna in Your Car

Don’t get confused when you get your first satellite antenna in your hand, as there are a lot of ways you can install it, and it can vary from car to car.

Our research shows that the most hassle-free, no-time-consuming approaches for installation are now available.

To help you through the steps, we will walk you through them one at a time, and you will accomplish your goal before you know it.

Process 1:

Step 1: know the wire connections

Simple monopole antennas are used to receive satellite radio signals. Antennas normally consist of a small rectangular box connected to your device by two wires.

One wire connects the antenna’s electricity to the car’s electrical system. The other cable connects to the FM modulator.

Most autos have it under the dash. No need to cut extra holes or use extra wires to connect your satellite radio to your car.

Step 2: choose the frequencies

Using the rectangle satellite antenna box, connect these two connections to acquire your chosen frequency range.

(Mind that, you are using a cheap antenna here, and it is not screwed. It has its positives and negatives.

On the positive side, you can replace it very easily. On the negative side, it might be wobbly in extreme weather conditions.)

Process 2

Step 1: maybe use an FM modulator!?

Many antennas capture radio waves using an FM modulator. It’s like a mini-radio station. In this case, it is a small-range transmitter.

The antenna in your automobile picks up the modulator’s signals, and you hear the radio.

In this case, you might not experience seamless, smooth tunings.

Process 3

Step 1: use an adapter kit instead

A radio adapter kit can also receive signals in your automobile antenna. The satellite radio adaptor kit works with any antenna. It has two wire ports.

One connects to your car’s main power source. The antenna connects the other.

Process 4: the recommended one-XM magnetic antenna

An XM Mount antenna is designed to be mounted on a car’s roof. If you already have another antenna on your car, place the XM Mount magnetic antenna three to four meters away from it.

The antenna can be mounted at the back or front of the automobile, depending on how much room it has in all directions.

Step 1: cable connections

The first step is to connect the cable to the car. Remember to attach the cable carefully, avoiding any metallic parts of your vehicle that could cut the connection.

Step 2: remove!

Remove the rubber plate from the automobile window or door, install the cable beneath it, and replace the rubber.

Step 3: navigating the cable:

Bring the cable from the inside towards the front. With a light blade knife, pull a rubber plate across the back of the car.

Now the cable will be hooked to the dashboard. Pull one end of the cable away from the rubber plate and coil it.

Take it to the lower side of the dashboard when it joins the front seat carpet.

Step 4: attachment of cable and antenna:

The last step is to attach the cable to the antenna. The antenna has an attachment port to connect the wire to it. After that, you are done.

Bet that was easy!

Safety notes:

There is one precaution: do not allow the excess wire dangling from the rubber plate; alternatively, coil it and secure it to the side of the door.

Frequently Asked Questions of How to Install Satellite Radio Antenna in Your Car

It is not common among people to see all these various options available for installing a satellite radio antenna and remain calm and call it a day!

Rather, it can be a perplexing situation. To save you from the odd predicament, we are offering you all the answers that you might have when you make your decisions.

So, sit back and let us illuminate you.

Where to mount/place the satellite antenna?

Outside of the car works for most of the cases, but yours might be an exception. Yours might work in a place closer to the windshield.

Tell you what, mount it on both places. Compare the results, and then go for it.

What issues I might face while dealing with satellite radio antennas?

Even though they are called premium antennas, they are not free in the ‘hectic’ zone.

Along with antenna bending, malfunctioning, and simple breaking problems, plugging issues might also appear to be common.

How can I fix it if my antenna is not functioning properly?

Obviously, to avoid that from happening, keep the system under regular maintenance.

And to get rid of it, restart the radio, check the mounting, inspect for visible damages and lastly, stretch the cable to its maximum length.

If all that caring doesn’t pay off, look for a replacement.

Can I use my standard radio antenna to somehow get access to premium stations?

 The simple answer is, no.

Because satellite radios and traditional radios broadcast channels of different frequencies.

Consequently, their antennas won’t catch signals while inter-replacing them.

What are the buying considerations for installing a satellite radio system?

Most of the new cars today are compatible with the system.

But if you run an old model, don’t worry, options are available for that case, too.

It’s best if you talk with the manufacturer about the models and all that mechanic stuff. But we can tell you about what you should be concerned about.

Compatibility, expandability, purpose/demands, mounting, and lastly, money.


A satellite radio antenna can be quite helpful for a vehicle, especially for navigation.

But the thing that has made this thing a craze of the town is how much entertainment the users can get access to.

Yes, they do admit that it might seem like a splurge, but it’s worth it.

Another factor is that the latest antennae will assist car mechanics to access the vehicle’s software and make it more efficient.

The antenna’s main goal is to strengthen computer-based control over cars to assure their safety and to ensure that the vehicles are operating properly.

We hope that you can meet all your needs of entertainment through this amazing innovation, and enjoy the lifetime experience.

Before we wish you luck, please feel free to take a look at these cool crystal-clear instructions for an even betterment.

Satellite radio antenna installing made easy:

Installing a satellite radio tuner within another radio:

A better understanding to satellite radios:

Similar Posts:

Leave a Comment