We are a participant in the Amazon Affiliate program. If you buy products through our chosen links, we may receive a small commission, but the price of the product will remain the same. Learn more.

Top 10 Best Wire For Dipole Antenna 2021 Buyer’s Guide

Even with the ever-increasing numbers of wires in the market, it is hard to find the best wire for dipole antenna.

The reason for this is partly because most of these wires used in making the dipole antenna have less conductivity, plus they are made from two or more materials and are not very pure.

This article is for people who have been having a hard time finding the right options among the many options in the marketplace nowadays.

In this article, we took the pains to review some of the best wires for your dipole antenna based on some important factors such as durability, length of the wire, gauge, impedance, and some other important parameters which will be discussed in the article.

What is The Best Wire For Dipole Antenna?

 The RG8X Coax Coaxial UHF PL259 stands as the best wire for dipole antenna in the market right now for a lot of reasons which you’d soon find out.

This product, aside from the fact that it has a wide-range antenna connection, also has a strong base. As a result, it is suitable for handling power to the tune of 1500 watts.

Why Lighting Supply is the best wire brand for dipole antenna?

Lightning supply provides some of the most extensive offerings of hard-to-find and top-seller electrical wires for your dipole antenna.

It earned this position because of the strong signals, broadband coverage, and multi-efficient functionalities that it features during its use.

Comparison Table of Best Wire For Dipole Antenna

ImageBrand Details
iLightingSupply
THE CIMPLE
Phat Satellite
RG8X Coax UHF Pl259
Ancable
Antenna MS135
Hundred (100) Ft. RG8X
Bare Copper Wire14
AmazonBasics
NAC Wire

10 Best Wire For Dipole Antenna Review & Buying Guide

Here is the list of the best wires we consider for dipole antennas. You should select from this list to get desirable features and antenna durability.

This selection is based on our research and you won’t have any problem using these wires for your dipole antenna.

01. iLightingSupply 56-0835-06 18

 

 

Highlighted Features

  • Gauge braided
  • Grounding wire
  • Bare copper wire
  • Fully molded
  • Very flexible

The iLightingSupply 56-0835-06 18 Braided Bare Wire is good to go to the wire for antenna and it is pocket friendly in the sense that almost everyone can afford it.

It is fully made of copper and as a result act as a great conductor of electricity.

It also acts as a grounding dust collector because it has to touch the earth before it starts working perfectly.

New users will have no problem using it because it comes with an instruction manual that directs its usage.

If a grounding wire is what you need then the iLightning braided bare wire is for you.

Pros

  • Easy to install
  • Does not require a battery
  • Easy to use

Cons

  • Cannot work for AM broadcast
  • Very stiff

02. THE CIMPLE CO 100′ Feet, Black RG6

 

 

Highlighted Features

  • Excellent picture quality
  • Works perfectly indoor and outdoor
  • Weatherproof
  • Highly durable
  • Increased frequency range
  • Quality connectors

This is a highly coated copper wire that is durable and of high quality.

It is fully coated with copper to increase the conductivity and make it easier for communication uses.

A high-grade 360 compression connector ensures that the cable remains waterproof and waterproof, without breaking the signal.

In the end, it ensures that the wire ends can withstand pulling, harsh weather including extreme hot and cold.

It has an outer jacket that is flexible, UV resistant PVC that functions indoor and outdoor.

The wire has length markings at every two feet on the side which makes it easier to cut to lengths.

Pros

  • Works with air antennas
  • Resistant PVC Jacket.
  • Weatherproof
  • Free technical support.

Cons

  • The wire is stiff
  • Slow connection

03. Phat Satellite Grounding Wire

 

 

Highlighted Features

  • 100% pure copper core
  • RoHS compliant and CSA certified
  • THHN PVC Jacket
  • Protects from lightning strikes and electric shock

The Phat Satellite grounding wire is made of 100% pure copper that is coated with nylon.

This makes it thermoplastic and resistant to a high amount of heat.

If you are looking for a suitable grounding wire, then you should consider this product.

Aside from its use for a dipole antenna, this wire finds a host of other uses, such as in telecoms.

To cap it all up, this wire is perfect for harsh environmental conditions.

Pros

  • Ideal for grounding equipment
  • Made of high-quality copper
  • Protects against lightning
  • Thermoplastic

Cons

  • Not a very flexible option

04. Fifty(50) ft. RG8X Coax UHF Pl259

 

 

 

Highlighted Features

  • Fifty ohms’ low-loss
  • UHF PL-259 plug
  • Nickel-coated connectors
  • Fully-molded

This wire is one of the most sought-after wires on our list because of its high quality.

We recommend it for use in instances where high power is needed. The wire comes with a 50Ω impedance.

If you are looking for the best coax wire for your ham radio, then this is your best bet.

The different connections in the wire are adequately soldered and they do not pose any form of harm. It is made of copper and this makes it a great conductor.

One of the best when selecting wire for a dipole antenna.

Pros

  • Very solid connectors
  • Reasonably flexible cable
  • The supplier/vendor ships the product quickly to the destination.
  • Comes with a few couplers to enable ease of use for those who need them

Cons

  • When used with an antenna, it may have issues with recurrent loss of grounding.
  • Takes time before catching signals

05. Ancable 300 Ohm FM Antenna wire

 

 

Highlighted Features

  • 9 ft. FM coax antenna wire
  • Easy-to-install
  • 300 ohms FM antenna
  • Fits receivers with a terminal socket or clip

You can easily install this cable, plug it, and use it. When you first purchase this cable, it has three hundred ohms, and this makes it improve the receptivity of your radio greatly.

With a length of up to 5.9 ft., you can be sure that this wire will serve your purpose.

Also, this antenna wire makes it possible for you to receive a great number of radio stations that are very close, meaning that you’d have different options to choose from.

Aside from radios, you can also receive healthier signals on your basements, offices, garage, shops, home, tabletops, etc.

Pros

  • High-quality stations receptivity
  • The antenna can be stretched from the radio and it would still work optimally
  • Fits receivers with terminal FM socket or a clip
  • Easy to install and use

Cons

  • Hard to strip off the dense plastic without cutting off parts of the wires

06. Super Antenna MS135

 

 

Highlighted Features

  • Very flexible
  • Max radio frequency power of 500 watts
  • Great conductor
  • Uses tinned copper

This antenna wire is one of the best portable options for ham radio antenna on our list.

With its ground radial design, the wires do not need to make contact with the earth to make the radio work perfectly.

It is a good conductor and is also multi-strand composed of tinned copper to conduct electricity into it very well.

MS135 is resistant to ultraviolet rays, is the weather, and waterproof – meaning that it wouldn’t be hampered when there is a change in weather or when the temperature is decreasing and increasing at the same time.

Also, its outer covering is resistant to tangling. You can bank easily on this wire as your best bet if you are looking for a flexible option.

Pros

  • Extremely rugged and flexible
  • Can easily be wrapped on kite winders for portable and easy use
  • Strong enough conductor that can pull through the branches of a tree without breaking.
  • Can withstand several tropical storms without encountering any problem
  • Very easy to use.

Cons

  • Pulling the wire straight off a roll may kink the wire

07. Hundred (100) Ft. RG8X Coaxial UHF PL259

 

 

Highlighted Features

  • A hundred feet coax cable
  • Double-shielded 24-inch black PVC jacket
  • Bare copper braid shields
  • Entirely molded nickel-plated connectors

This wire is composed of naked copper conductors and aluminum foils and it is mostly applied for high-powered uses.

It is easy to use and durable. RG8X Coax Coaxial comes with connected made of fully-molded nickel-coated brass.

While it is true that this wire can also work for ham radios, it finds its best application in a dipole antenna.

If you are looking for an option that can comfortably carry a lot of loads and still retain its durability and conductivity then this is your best option.

Pros

  • It has a near-perfect braid shielding
  • The dielectric is completely covered with aluminum
  • Its quality is rather impressive
  • Features screw-on connectors

Cons

  • It is very stiff, plus it has a very low flexibility
  • It’s pricey

08. Bare Copper Wire14 AWG

 

Highlighted Features

  • Suitable for grounding wire or crafts
  • More 99% pure copper
  • Non-insulated single wire
  • Meets the required standards for non-insulated copper wire

This copper wire from Small Parts is the go-to option for craftworks like weaving and jewelry, and also good for use as a grounding wire.

The wire comes in single strands or multiple strands that you can use for different purposes.

Also, its exterior comes annealed, and this makes it possible for the wire to gradually cool to decrease any form of internal stress on it. As a result, it always appears bright.

The quantity of current that a wire carries is directly proportional to the size of the wire.

So, if you want the wire to carry more current, then be ready to increase its size.

The normal composition of the wire is copper, and this confers some useful ductile properties to the wire.

Pros

  • Perfect for manufacturing jewelry
  • Comes with tight packaging to prevent the oxidation of the copper wire
  • Very sturdy product
  • This product features a fine surface finish

Cons

  • The plastic that wraps around each wire spool may be hard to unwrap

09. AmazonBasics 100ft Wire

 

Highlighted Features

  • The wire is thermoplastic
  • High-quality continuous signals
  • Wraps around a tough plastic spool
  • Connects speakers to an amplifier or A/V receiver

This wire can connect to an A/V receiver or amplifier. It comes with a plastic jack that surrounds the speaker and helps to relay uninterrupted signals.

Also, it includes a white line that differentiates the wire’s polarity for a suitable sound system.

This will even make more sense for new users because the markings instruct them on how to use the wire.

One of the best features of this product is its durability and conductivity.

Pros

  • Flexible and very easy to use
  • Features soft insulation materials
  • The cord comes with an easy-to-see dark marking for the negative terminal
  • The cable helps produce very high-quality sound

 Cons

  • It can easily break with the protective cover is stripped off

10. NAC Wire and Cables NCA3065

 

Highlighted Features

  • Aerial rotator cable
  • Outer insulation
  • Easy to install
  • Great conductor
  • Abrasion-resistant

This Is an excellent wire and value for your money. The wires are in multiple strands which makes it possible to be used for different purposes.

It has an outer diameter of about 4.65mm which is the best for a rotor antenna wire.

The terminal screw of the wire can be loosened easily so it can fit inconveniently.

Nac wire cable is best utilized as a rotator cable because it is flexible and can be turned easily.

If you are looking for a rotator cable then this is your best option to go for.

Pros

  • Excellent Rotor cable
  • It is flexible
  • Impressive quality

Cons

  • Very slow to catch signals
  • It is pricey

Buying Considerations of Best Wire For Dipole Antenna

Many of us nowadays do not seek the advice of experts in the field of what we want to purchase and this has made a lot of people purchase the wrong quality of wire for dipole.

There are certain things that you need to know about a dipole antenna before making any buying decision which will guide you and help you make the best purchase.

The information below will guide you on what you need to know before opting for one.

Balun and Dipole center

A wire can experience an increased strain when tension mounts on it. If the wire comes with a dipole center, then this tension can be reduced to avert any damage that the feeder may encounter.

So it is compulsory to purchase a wire that comes with a dipole center.

Use the coaxial or the open-wire feeder to link with the dipole center. If you cannot lay your hands on a dipole center, then you may use a balun instead.

Balun, which is an alternative for dipole also called a transformer, works in transmitters and telephones.

Antenna wire

The antenna wire is one important feature that you need to take note of whenever you want to make one purchase.

Although you can use standard insulate wire, but copper wire can stretch and conduct electricity very well when used persistently.

The best option is the hard-drawn wire because of its lesser flexibility and its decreased ability to stretch.

Insulators

It is a good practice to pace insulators at the antenna ends because of the benefits they provide.

Either end of the antenna will feel the maximum voltage. The voltage may be great, especially if the antenna connects to high-power transmitters.

You can link the wires to the insulators. This will provide greater insulation.

The feeder

This is another aspect you need to consider before settling for a dipole antenna. Feeders are vital inclusions in the construction of balun and learner’s dipole when connecting a wire to your house.

Formerly, coax wires are the go-to options for this procedure due to their ease of use and their ability to tolerate another antenna that is close by.

Frequency Coverage

Sometimes, you may purchase a digital antenna that is quick to work with your television than digital and analog transmission.

The coverage of TV frequency needs to be checked when you purchase a TV. But then, most of the TVs you’d get in the marketplace are the UHF type.

Alternatively, the log, also referred to as the wideband antenna, may also be utilized to help boost your intermittent TV signal.

If you are using VHF cast TV, you to make sure that they utilize an antenna that corresponds to the same manufacturer.

The reason for this is to make sure that you enjoy the best signals in your locality.

Dipole feeding and Impedance

The basic inclusion of most dipole antennas is their feeding impedance. When the paired sections of the antenna are linked to the ground/ earth, then the dipole can be regarded as balanced.

The first thing you need to consider is the balanced feeder, like two parallel wires, double feeder, or unclosed wires may be used for the feeding.

But, this feeder features a minor loss mark and may be utilized rather than HF.

One disadvantage of using this feeder is that it can be a challenging task for shop entrances and buildings because any items close by may harm the feeder balances and increase loss.

But, a coaxial wire may prevent all of these difficulties. It stops the radio frequency that runs through the outer part of the wire.

You can use the outer wire with a transmitter. This will help in the quickening of the response from the receiver and passes interferences to users nearby.

One other vital inclusion of dipole feeding via a system with real impedance is to make room for the proper transference of the power to the dipole.

Ensure that the dipole balance is up to seventy-three ohms.

But then, there is a scarcity of this dipole because there is a concurrent change between impedance and the parameters that involve the wire strength, ground height, etc.

Frequently Asked Questions About Best Wire For Dipole Antenna

What is the function of an antenna?

The antenna is an electrical device that changes Electrical energy (inside the Radio Transmitter) into Electromagnetic energy that is in the form of a Radio Wave.

Antennas are devices built for the transmission of electrical signals from a radio transmitter to radio waves in the form of E-M (electromagnetic) energy.

What are dipoles?

Dipoles are the simplest forms of station antennas that are usually half the length of a wavelength. It requires cautions assembly to make sure it converts electrical signals to electromagnetic signals in an efficient manner.

What ranges do antennas offer?

Firstly, we have two types of radio signals, UHF and VHF signals. All UHF and VHF radio signals are strong enough when the antenna site is visible I.e in proximity to the viewing source.

They normally vary between 1 – 2 kilometers. Some can even reach thirty kilometers, or even more.

What type of feeder wire should I acquire?

This is an important question as it will decide the level at which the antenna will catch signals.

There are different feeder types that we recommend for you to use; they usually vary from ½-inch, 7/8-inch, and 1 ¼-inches.

The more the diameter of the wire, the better it is. So you want to try out wires with larger diameters.

Conclusion

RG8X Coax UHF Pl259 topped our list of the top wires that you can use for your dipole antenna for several reasons – it is composed of tinned copper that is a highly flexible and good conductor of electricity.

Plus, it also offers an RF power of about 500 watts, which is fair enough. So, which of these wires that we have listed suits your fancy?

Leave a Comment